Top 10 Marine Epoxy Putty UK – Sealers

As an Amazon Associate I earn from qualifying purchases.

1. PC-Products

PC Products 25567 PC-Marine Moldable Epoxy Putty, 2 oz Stick, White

PC-Products - Formulated to adhere to wet, dry, and submerged underwater surfaces. Waterproof, sandable and paintable. No drip or sag, even on overhead work. 20-30 minute working time, 60 minute cure time. Hand-mouldable.
BrandPC-Products
ManufacturerProtective Coating Co.
Height20.96 cm (8.25 Inches)
Length10.16 cm (4 Inches)
Weight0.05 kg (0.1 Pounds)
Width3.81 cm (1.5 Inches)
Part Number25567
Model25567

2. Protective Coating Co.

Underwater Repair, Off White, PC-Products 080115 PC-11 Marine Grade Paste Epoxy, 1/2 Pound

Protective Coating Co. - Demonstrates excellent chemical resistance to mild acids, gasoline, fuel oil, detergents, caustics, salt and fresh water. Bonds to wet, dry and fully submerged substrates.
BrandProtective Coating Co.
ManufacturerProtective Coating Co.
Height10.16 cm (4 Inches)
Length6.35 cm (2.5 Inches)
Weight0.32 kg (0.7 Pounds)
Width6.35 cm (2.5 Inches)
Part Number080115
Model080115

3. MagicEzy

Oyster White | Gelcoat TouchUp Repair Paint Filler | Fix Cracks and Scratches Like a Pro | Marine Epoxy Putty | Gloss Gelcoat Putty, MagicEzy Hairline Fix

MagicEzy - Ultra tough – lifetime durability protection; nanotechnology inside this marine epoxy repair filler penetrates deep into pores; It’s non-toxic, water resistant, and non-hazardous.

Multiple uses; use it on your fibreglass boat or jet ski, fibreglass showers, kayaks, or as a touch up repair product for hard surfaces around your home like ceramic, porcelain and stone. It’s that simple. Expert fibreglass crack and scratch repair: Fix fine damage easily. Works on hairline cracks, stress cracks, spider cracks and scratches. Easy gelcoat touch up: just clean the surface, apply, level and wipe. Gelcoat repair kit in a tube: one-part, glossy fibreglass gelcoat repair filler and sealant so it colours, coloured, fills and seals in one application.
BrandMagicEzy
ManufacturerMagicEzy
Weight0.02 kg (0.04 Pounds)
Part Number200202
Model3006.0320

4. JB Weld

JB WELD 8237UK JB8237 Plastic Weld Fast-Setting Off White Multi Purpose Reinforced Epoxy Putty, 57 G & 8272UK JB8272 Marine Weld Waterproof 2 Part Epoxy Adhesives

JB Weld - Product 2: j-b weld marineweld: a two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Product 1: once cured, drilled, it can be sawed, carved, sanded and painted and is rated at a tensile strength of 350 psi. J-b weld marineweld’s set and cure color is dark grey.

Product 2: surface applications: aluminum, Plastic/Composite, Fiberglass, Metal, Wood. It retains strength above and below water. Product 1: sets in 25 minutes, cures Off-White in 3 hours - does not adhere to polyethylene, Polypropylene or some other plastics. When fully cured, chemical and acid. Once cured j-b weld MarineWeld can be tapped, filled, molded and drilled. Product 1: great for rigid and semi-flexible plastic, automotive trim, PVC and CPVC pipes, ABS, bumpers and more. Product 2: versatile and dependable: j-b weld marineweld is steel reinforced, marineweld is waterproof and resistant to petroleum, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit 287 degrees Celsius.

Ideal for all DIY marine and watercraft repairs. Product 1: hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. Product 2: cure and set time: after mixing the tubes at a 1:1 ratio, sanded, it takes 4-6 hours to set and 16-24 hours to cure.
BrandJB Weld

5. JB Weld

J-B Weld 6 Minute Steel Epoxy & 8272UK JB8272 Marine Weld Waterproof 2 Part Epoxy Adhesives

JB Weld - Product 1: full cure within 4-6 hours. Product 2: surface applications: aluminum, Fiberglass, Plastic/Composite, Metal, Wood. Product 2: j-b weld marineweld: a two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces.

It retains strength above and below water. Product 1: able to withstand temperatures up to 300ºF when fully cured. Product 2: cure and set time: after mixing the tubes at a 1:1 ratio, sanded, it takes 4-6 hours to set and 16-24 hours to cure. Product 1: Sets in 6 minutes. Product 1: tensile strength of 3127 PSI. When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid.

Once cured j-b weld MarineWeld can be tapped, filled, molded and drilled. Product 2: versatile and dependable: j-b weld marineweld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit 287 degrees Celsius. Ideal for all DIY marine and watercraft repairs. J-b weld marineweld’s set and cure color is dark grey.
BrandJB Weld

6. JB Weld

J-B Weld 8272UK JB8272 Marine Weld Waterproof 2 Part Epoxy Adhesives

JB Weld - Versatile and dependable: j-b weld marineweld is steel reinforced, marineweld is waterproof and resistant to petroleum, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit 287 degrees Celsius.

J-b weld marineweld: a two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Do it yourself: big or small, quality, you can diy it with j-b weld. Once cured j-b weld MarineWeld can be tapped, molded and drilled. J-b weld marineweld’s set and cure color is dark grey. J-b weld delivers superior performance, and results for the World’s Strongest Bond.

When fully cured, chemical and acid. It retains strength above and below water. Surface applications: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood. Cure and set time: after mixing the tubes at a 1:1 ratio, filled, sanded, it takes 4-6 hours to set and 16-24 hours to cure. Ideal for all DIY marine and watercraft repairs. Our heavy duty epoxy and adhesives repair and restore it right the first time.
BrandJB Weld
ManufacturerJB WELD LTD
Height3.81 cm (1.5 Inches)
Length20.32 cm (8 Inches)
Weight0.07 kg (0.15 Pounds)
Width12.7 cm (5 Inches)
Part Number8272UK
Model8272UK
WarrantyNa.

7. SDMAX

Epoxy Putty Multipurpose Repair Pellets Wood Metal Plastic Ceramic Waterproof UK

SDMAX - Multi-use waterproof epoxy putty repair pellets 6 x 5g waterproof adhesive filler Filling in holes in bricks, concrete etc Can be used as an adhesive to secure small objects Seals leaks in pipes Can be moulded by hand like putty Can be polished, drilled, filled, plaster, sawn and painted etc.
BrandSDMAX
Manufacturerrp
Part Number764

8. PC Products

Two-Part Marine Grade, PC-Products PC-11 Epoxy Adhesive Paste, Off White 160114, 1lb in Two Cans

PC Products - Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F. Resists mild acids, fuel oil, caustics, gasoline, detergents, and fresh and salt water. Bonds many materials, glass, including fiberglass, ceramic, concrete, many metals, and rubber. High-tack paste can be used in vertical and overhead applications. Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments.
BrandPC Products
ManufacturerProtective Coating Co.
Height7.62 cm (3 Inches)
Length14.61 cm (5.75 Inches)
Weight0.51 kg (1.12 Pounds)
Width7.62 cm (3 Inches)
Part Number160114
Model160114

9. STAR BRITE

Even Underwater, Wood, Fiberglass, Star Brite 4oz Epoxy Putty Stick, Plastic, Permanent Repairs, Make Fast

STAR BRITE - Bonds with fiberglass, metal, ceramic, wood, concrete, glass & various plastics. Works on wet, damp, dry surfaces - even underwater. International products have separate terms, including fit, and language of product, age ratings, are sold from abroad and may differ from local products, labeling or instructions. Easy to use; just hand knead until color turns white and apply to damaged area.
BrandSTAR BRITE
ManufacturerStar brite
Height22.86 cm (9 Inches)
Length15.24 cm (6 Inches)
Weight0.09 kg (0.2 Pounds)
Width15.24 cm (6 Inches)
Part Number087104
Model087104

10. Unibond

UniBond 2002387 30 g Repair Express Epoxy Putty, White

Unibond - Very strong and waterproof. New non-irritant formula. 6 ready-to-use 5g mono-doses. Suitable for indoor and outdoor use drillable / paintable / sand able. Z.
BrandUnibond
ManufacturerHenkel Ltd
Height21.5 cm (8.46 Inches)
Length12 cm (4.72 Inches)
Weight0.04 kg (0.09 Pounds)
Width1.7 cm (0.67 Inches)
Part Number2002387
Model2002387
WarrantyNo guarantee.