Top 10 T Track Bolts and Knobs UK – Clamps

As an Amazon Associate I earn from qualifying purchases.

1. PLCatis

PLCatis T Track Kit M8 T-Track Accessories Universal T-Track Bolts Knobs Easy Gripping T Slot Bolts and Knobs T Track Clamp for Woodworking Jigs and Fixtures 2 Sets

PLCatis - It can be attached to the fence of a chop saw, secure place to attach feather boards, drill press or router table to provide a quick, stops and hold-downs. Easy gripping design- the 3-prong no sharp edge design of the t knob provides the ultimate in comfort, easy to grip while performing fastening, clamping.

Versatile to be used- the t-track kit has many great uses. Package includes- 2 knobs: 8*33. 5*37. 5mm; 2 t track bolts: dimension 8*100*22mm. Approxworking temperature range of -30°C to +85°C. The t slot clamp sit is universal, works for most T-track that accepts standard 8mm bolt heads. Then lock the entire unit in place on your T-track. The oval shape head of the t slot bolts m8 ensures a smooth and nonbinding install into the T-slot.

Easy installation- simply insert the head of t bolt into the t slot track, thread the T-knob onto the bolt and tighten down. Well made- the t-track clamp includes t slot nuts that are made of top quality plastic with molded-in brass insert that will not strip; T-slot bolts are constructed from strong metal, providing optimal heat and corrosion resistance, offering the ultimate in durability and strength. This kit can easily be utilized to give you the best holding strength.
BrandPLCatis
ManufacturerPLCatis
Part Number02

2. PowerTec

POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Hex Bolts and Washers Set of 10

PowerTec - Fasteners can be used with material that is less or equal to 1-inch thickness. Includes 10 sets of 1/4-inch thru hole knobs, 1/4-20 x 1-1/2-inch bolts and washers. Great for Jig building and other projects. Easy use and works with any t-track that accepts standard 1/4-inch bolt heads.
BrandPowerTec
ManufacturerPOWERTEC
Height5.08 cm (2 Inches)
Length20.32 cm (8 Inches)
Weight0.02 kg (0.05 Pounds)
Width10.16 cm (4 Inches)
Part Number71068
Model71068

3. E-outstanding

E-outstanding 8 Sets T-Track Knobs Kit 1/4" Hex Head Manual Nut with 1/4-20x2-1/2" Galvanized Full Thread Outer Bolts and 1/4" Washers

E-outstanding - Simply insert the tip of the bolt into the rail with a washer and align it with the threaded screw. Ideal for jig construction and other projects. This is effortless and simple for any project and is required in any store inventory. Fasteners can be used for materials less than or equal to 2. 5" thick and are ideal for fixture fabrication and other projects. Easy to use and can be used with any T-track that accepts standard 1/4" bolt heads.
BrandE-outstanding
ManufacturerE-outstanding
Part NumberHHMNFTOB-2-12-8S

4. Samfox

Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track Woodworking T Screw+Knob Nut Only, T-Track Knobs, T-Bolt Kit

Samfox - This is for a set of hold down clamp for use with T-slot track. Slides into t-track & quickly secures with the turn of the hand knob nut. Puts clamping pressure anywhere along the flush-mounted T-slot T-track. Both t-screw and threaded rod are of 8mm threaded. T-bolt kit is useful in many woodworking & metalworking applications for work holding, positioning, and fixturing.
BrandSamfox
Manufacturersamfox
Weight0.06 kg (0.13 Pounds)
Part NumberZG719-6

5. Hilitand

T Screw and M8 Plastic Handle,Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track DIY Woodworking Tool,Pack of 2 Set

Hilitand - How to useslides into t-track & quickly secures with the turn of the hand knob nut;Both T-screw and threaded rod are of 8mm threaded. Sizesize of t-screw and threaded rod : M8; main Material: Metal. Wide applicationfor a set of hold down clamp for use with T-slot track and useful in many woodworking & metalworking applications for work holding, positioning, and fixturing. High qualityputs clamping pressure anywhere along the flush-mounted T-slot T-track. Easy to usethe hold down clamp is easy to clamp wood to a drill press table or any work surface.
BrandHilitand
ManufacturerHilitand

6. Deadwood Crafted Tools

Clamping Knob Jig Knobs T Track Knobs and Bolts 10-Pack, Bolt with Knob, DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob

Deadwood Crafted Tools - Package contents: tightening knob kit includes 10 t track knobs 5/16”-18 threaded knobs, 10 bolts, and 10 washers for your convenience; This T bolts and knobs pack is for use with a hold down clamp sold separately. Adjust and tighten: the dct 3 star knob t track knobs kit with bolts & washers 10-pack is a package of screw-on clamping knobs that can be used on your existing saw fence, fixture, drill press, lathe, feather board, routing jig, or anywhere else that a 5/16-Inch-18 internal thread is required; Many 3/4-inch wide x 3/8-inch deep 19.

1mm x 9. 5mm t-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts. Built to last: t knobs package includes plastic knobs that are constructed from polypropylene plastic with molded-in brass insert that will not strip; Bolts and washers constructed from steel. Easy to use: insert the bolt into the t-slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track; Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.

Perfect size: knobs have a 2-inch diameter and 1-inch height 5. 1cm x 2. 5cm; t track knob threading has 5/16-inch 7. 9mm diameter and 18 threads per inch if you turn a nut 18 revolutions it will move 1 inch; Bolts and washers are 5/16”-18 x 1-1/2-inch; Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
BrandDeadwood Crafted Tools
ManufacturerDeadwood Crafted Tools
Height3.18 cm (1.25 Inches)
Length11.18 cm (4.4 Inches)
Weight0.16 kg (0.35 Pounds)
Width15.88 cm (6.25 Inches)
Part Number8686

7. PowerTec

4PK, POWERTEC Universal Stop Kit for T-Track System w/Parallel | Perpendicular Stops

PowerTec - Features: an easy-to-use operation, a low-profile design that eliminates interference and offers clearance for thin stock and tools, PLUS tongues to ensure stock remains firmly locked into place along the track.

Specs: both parallel and perpendicular stops measure 1-1/2” long x 1-5/8” wide, and 5/16-18 t bolts | Knobs allow clearance for machining stock as thin as 3/4”. Kit includes: 2 short stops, 4 low Profile Knobs, 2 inline Stops, & 4 T-Bolts. Function: works in combination with our exclusive powertec t-track system along with custom built and other brands - providing a quick, precise and secure holding solution for a wide assortment of t track table applications, light CNC machining and clamped board configurations.

Quality build: components are made with premium extruded aluminum and possess a silver anodized finish for optimal durability with corrosion resistant properties – manufactured with high precision measurements for a smooth, accurate fit.
BrandPowerTec
ManufacturerPOWERTEC
Height1.27 cm (0.5 Inches)
Length10.92 cm (4.3 Inches)
Width10.41 cm (4.1 Inches)

8. belupai

Belupai 10pcs M6 M8 T Slot Nut T-Track Sliding Nut for Woodworking Tool Slot Fastener

belupai - 10pcs m6/m8 t slot nut t-track sliding Nut For Woodworking Tool Slot Fastener. Undersized to fit machine table slot case hardened. Material: aluminium Thread: M6/ M8. It is used for t-slot aluminum extrusions to connect other parts and connected together with T screw or others. T-slot nuts enable the user to add clamps to a fixture without tearing down existing clamps.
Brandbelupai
ManufacturerPannow
Part NumberM8-B07NXQ1KGS

9. Fransande

Fransande 2 Set T Screw and M8 Plastic Handle,Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track DIY Woodworking Tool

Fransande - Easy to usethe hold down clamp is easy to clamp wood to a drill press table or any work surface. Wide applicationfor a set of hold down clamp for use with T-slot track and auseful in many woodworking & metalworking applications for work holding, positioning, and fixturing. High qualityputs clamping pressure anywhere along the flush-mounted T-slot T-track. Features:slides into T-track & quickly secures with the turn of the hand knob nut.
BrandFransande
ManufacturerFransande
Part Number443206

10. Tamkyo

Tamkyo 2 Set T Screw and M8 Plastic Handle,Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track DIY Woodworking Tool

Tamkyo - High qualityputs clamping pressure anywhere along the flush-mounted T-slot T-track. Wide applicationfor a set of hold down clamp for use with T-slot track and auseful in many woodworking & metalworking applications for work holding, positioning, and fixturing. Features:slides into T-track & quickly secures with the turn of the hand knob nut. Easy to usethe hold down clamp is easy to clamp wood to a drill press table or any work surface.
BrandTamkyo
ManufacturerTamkyo
Part Number443206