Top 8 Spiral Upcut Bit UK – Router Accessories & Parts

As an Amazon Associate I earn from qualifying purchases.

1. YONICO

Diameter: 1/4", Flutes: 3-1/4" Shank, Cutting Height: 1", Yonico 35314-SC, Low Helix Upcut Spiral End Mill CNC Router Bit

YONICO - Satisfaction Guaranteed & Lifetime Warranty. Cutting diameter: 1/4" Cutting Length: 1". Premium quality Carbide Industrial CNC Router Bit. Shank diameter: 1/4" overall Length: 2-1/2". Industrial Quality Router Bits.
BrandYONICO
ManufacturerPrecision Bits.com
Height0.64 cm (0.25 Inches)
Length6.35 cm (2.5 Inches)
Width0.64 cm (0.25 Inches)
Part Number35314-SC
Model35314-SC

2. MLCS

3-Piece, MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set

MLCS - Solid micro grain carbide cuts smooth and stays sharp. Remove sawdust and wood chips from plunge cuts with upward shearing. Perfect for deep mortises and cutting dadoes in a router table. 1/4-inch and 1/2-Inch shanks. 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter.
BrandMLCS
ManufacturerMLCS
Part Number200
Model200

3. YONICO

Upcut Spiral End Mill CNC Router Bit, Diameter: 1/2", Flutes: 2-1/2" Shank, Cutting Height: 1-5/16", Yonico 31262-SC

YONICO - Satisfaction Guaranteed & Lifetime Warranty. Shank diameter: 1/2" Overall Length: 3". Cutting diameter: 1/2" Cutting Length: 1-5/16". Premium quality Carbide Industrial CNC Router Bit. Used for: standard milling, dadoing, and boring.
BrandYONICO
ManufacturerYonico
Height1.27 cm (0.5 Inches)
Length7.62 cm (3 Inches)
Weight0.11 kg (0.25 Pounds)
Width1.27 cm (0.5 Inches)
Part Number31262-SC
Model31262-SC

4. SpeTool

1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving, SpeTool Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank

SpeTool - Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits. Solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance.
BrandSpeTool
ManufacturerSpeTool
Part NumberSPL-D1/2-1/2-U

5. sourcing map

3.175mm x 32mm Upcut Solid Carbide End Mill 2 Flute Milling Cutter, 2pcs, for Acrylic PVC MDF Wood Hardwood, sourcing map CNC Spiral Router Bits 1/8" 3.175mm Shank

sourcing map - Sharp cutting edge provides smooth cutting and no glitches. Carbide materials: made of solid carbide tungsten steel, wear resistance, high hardness, good toughness and heat resistance.

Used for most standard milling applications. Spiral bit: shank diameter: 3. 175mm / 1. 26"; overall length: 60mm / 1/8"; cutting diameter: 3. 175mm / 0125"; cutting edge length: 32mm / 2-3/8". Good for surface machining, plywood, carving, ABS, milling, cutting, nylon, plastic, PVC, acrylic, slotting, 2D or 3D relief sculpturing. Upcut design: upcut end mills can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life.

Wide applications: suitable for engraving, sculpturing in MDF, wood, hardwood etc. Provide good cutting strength and drilling effect to improve efficiency. Spiral and sharp flute: spiral chip space design for fast and clean chip removal.
Brandsourcing map
Manufacturersourcing map
Part Numbera21042000ux0365

6. SpeTool

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

SpeTool - The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
BrandSpeTool
ManufacturerSpeTool
Part NumberSP-D1/4-1/4-U

7. YONICO

Yonico 14121 1/4-Inch Up-Cut Flush Trim Solid Carbide Spiral Router Bit 1/4-Inch Shank

YONICO - Polished to a mirror finish from a solid carbide rod for precision & accuracy. The two independent ball bearing guides at the tip ensure smooth operation every time.

Made from extremely durable solid carbide, ply-woods, laminates, composites, the Yonico 14121 is ideal for use with soft & hard woods, plastics and some non-ferrous metals. For use on table mount and handheld router. Flush trim all types of material for a perfect finish. 1/4" shank. The yonico 14121 solid carbide flush trim up cut router bit is designed to provide extra clean and smooth flush trim cuts. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
BrandYONICO
ManufacturerPrecisionBits.com
Height0.64 cm (0.25 Inches)
Length7.62 cm (3 Inches)
Width0.64 cm (0.25 Inches)
Part Number14121
Model14121

8. YONICO

Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank

YONICO - Bit breakage is less likely. For use on cnc, table mount and handheld routers. Cutting diameter: 1/4" cutting height: 1" shank diameter: 1/4" Overall Length: 2-1/2" Flutes: 2 Up-cut endmills direct woodchips up and away from the milling area leaving an unobstructed path for the endmill.

For standard cnc milling and routing where material removal and efficiency is required. Best used for: standard milling, dadoing, and boring. The up cut direction can leave behind a minimally rough top surface edge. Up cut end mills are the best choice for most standard milling applications. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. Polished to a mirror finish from a solid carbide rod for precision & accuracy.
BrandYONICO
ManufacturerYonico
Height0.64 cm (0.25 Inches)
Length6.35 cm (2.5 Inches)
Weight0.01 kg (0.02 Pounds)
Width0.64 cm (0.25 Inches)
Part Number31215-SC
Model31215-SC
WarrantyLimited lifetime warranty.