Top 9 10mm to 8mm Reducer UK – Pipes, Pipe Fittings & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. sourcing map

Sourcing map Straight Push to Connector Reducer Fitting 10mm to 8mm Quick Release Pneumatic Connector Plastic Union Pipe Tube Fitting Grey 2Pcs

sourcing map - Please insert the tube into the bottom before use. Mainly used for air compression systems, vacuum systems, pneumatic systems. 2 pcs for 10mm to 8mm OD plastic straight tube fitting. Note: make sure that the cutting surface of the pipe is vertical. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing.
Brandsourcing map
Manufacturersourcing map
Part Numbera19110100ux0710

2. sourcing map

Fit Hose ID 10mm to 8mm 2pcs, sourcing map Straight Brass Barb Fitting Reducer

sourcing map - The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Commonly used to connect lines for air, fuel, water, oil and inert gases in a quick and simple way. The coupling for connecting two hoses with the different diameter in a straight run. Barb dia. Fit hose id: 10mm to 8mm3/8" to 5/16"; total length: 42mm /1. 65"; hex width: 12mm / 047"; barb lengthapprox: 18mm / 071".
Brandsourcing map
Manufacturersourcing map
Part Numbera19091800ux0085

3. sourcing map

Sourcing map Straight Brass Barb Fitting Reducer, Fit Hose ID 10mm to 8mm

sourcing map - The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Barb dia. Fit hose id: 10mm to 8mm3/8" to 5/16"; total length: 42mm /1. 65"; hex width: 12mm / 047"; barb lengthapprox: 18mm / 071". Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The coupling for connecting two hoses with the different diameter in a straight run.
Brandsourcing map
Manufacturersourcing map
Part Numbera19091800ux0084

4. sourcing map

Fit Hose ID 10mm to 8mm 3pcs, sourcing map Straight Brass Barb Fitting Reducer

sourcing map - The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barb dia. Fit hose id: 10mm to 8mm3/8" to 5/16"; total length: 42mm /1. 65"; hex width: 12mm / 047"; barb lengthapprox: 18mm / 071". The coupling for connecting two hoses with the different diameter in a straight run. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way.
Brandsourcing map
Manufacturersourcing map
Part Numbera19091800ux0086

5. eMagTech

2X Brass Fittings for Hose Barb Tail Reducing Plug Reducer Straight Connector 10mm to 8mm for Water Gas Oil Boat Air Pipe

eMagTech - Used to connect for air, fuel, water, oil and inert gases line in a quick and simple way. Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Connects two hoses with the different diameter in a straight run. The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. This fitting has barbed connections on both ends for connecting two hoses.
BrandeMagTech
ManufacturereMagTech

6. The Lord of the Tools

24x Plastic Pneumatic Push to Connect Fittings Tube Straight Fitting Reducer Adapter Quick Release Fit Air Water Lines Hose

The Lord of the Tools - Feature: room-saving and flexible, the connect fittings are easy to install; 360-degree rotation is available. Package: the connector kit are 24 pcs in total, 8-6mm, 12-6mm, 10-6mm, 12-8mm, 8-4mm, 10-8mm, 3pcs each type, inner diameter of hole is 6-4mm, 12-10mm.

Note: make sure that the cutting surface of the pipe is vertical. Applications: used for air compression systems, vacuum systems, pneumatic systems. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. Easy to use: only need a simple push to connect to the tube, no extra sealing is required. Please insert the tube into the bottom before use.
BrandThe Lord of the Tools
ManufacturerThe Lord of the Tools
Part NumberBU897

7. sourcing map

Sourcing map Straight Push to Connector Reducer Fitting 10mm to 8mm Quick Release Pneumatic Connector Plastic Union Pipe Tube Fitting Grey 5Pcs

sourcing map - Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Mainly used for air compression systems, vacuum systems, pneumatic systems. Please insert the tube into the bottom before use. Note: make sure that the cutting surface of the pipe is vertical. 5 pcs for 10mm to 8mm OD plastic straight tube fitting.
Brandsourcing map
Manufacturersourcing map
Part Numbera19110100ux0711

8. sourcing map

Fit Hose ID 10mm to 6mm, sourcing map Straight Brass Barb Fitting Reducer

sourcing map - Barb dia. Fit hose id: 10mm to 6mm3/8" to 1/4"; total length: 44mm /094"; hex width: 11mm / 043"; barb lengthapprox: 20mm / 079". The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. The coupling for connecting two hoses with the different diameter in a straight run. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Brandsourcing map
Manufacturersourcing map
Part Numbera19091800ux0092

9. huicouldtool

PG 1pcs 6-4mm 8-4mm 8-6mm 10-6mm 10-8mm 12-8mm 12-10mm 16-12mm Straight Union Reducer Fitting Pneumatic Push to Connect Air,PG10-6

huicouldtool - Negative pressure:-750mmhg 10 Torr. Quick fitting Material:Brass/Plastic. Fit for tube material:PU / Nylon, Polyurethane. Operating pressure:0~102kgf/cm2 0~1. 0mpa. Operating temperature Range:0~60C.
Brandhuicouldtool
Manufacturerhuicouldtool
Part Number6903287484393