As an Amazon Associate I earn from qualifying purchases.1. The Lord of the Tools
1/2 Inch Drive Oxygen Sensor Socket 22mm Removal Socket with Wire Cutout
The Lord of the Tools - Use with a 1/2 inch drive ratchet or breaker bar. Fit for heated and unheated oxygen sensors. Cut-out section allows socket to pass over wiring. Package included: 1pc Oxygen Sensor Socket. Hardened and tempered Chrome Vanadium steel socket with finish, not easy to rust.
2. Mekanik
Mekanik Oxygen Sensor Wrench with Flexible Handle 22mm
Mekanik - Flexibly mounted handle with off-set grip for maximum access. Hardened and tempered Chrome Vanadium steel socket head with polished chrome finish. Cut-out section allows socket to pass over wiring. Suitable for heated and unheated oxygen sensors.
3. Tomantery
Tomantery Thread Chaser Tool, Oxygen Sensor Socket Set Corrosion Resistant Easy Operation Manganese Steel Standard Sizes with Square Hole for Automobile Repair
Tomantery - Good compatibility suitable for and other most car models, good practicality and compatibility. Standard sizes these dies and sockets have standard threads and sizes, which are easy to operate and not easy to slip or loosen. Manganese steel forged with 65 manganese steel, surface rustproof treatment, high hardness and corrosion resistance.
Main purpose can be used with ratchet wrench and post to remove and install vehicle oxygen sensor or hex switch. Dies and sockets including thread dies, straight socket, long and short oxygen sensor sockets, with simple operation.
4. Jeanoko
Jeanoko Thread Chaser Tool, Oxygen Sensor Socket Set Manganese Steel Corrosion Resistant Easy Operation with Square Hole for Automobile Repair
Jeanoko - Good compatibility suitable for and other most car models, good practicality and compatibility. Manganese steel forged with 65 manganese steel, surface rustproof treatment, high hardness and corrosion resistance. Dies and sockets including thread dies, straight socket, long and short oxygen sensor sockets, with simple operation.
Standard sizes these dies and sockets have standard threads and sizes, which are easy to operate and not easy to slip or loosen. Main purpose can be used with ratchet wrench and post to remove and install vehicle oxygen sensor or hex switch.
5. BOLORAMO
Oxygen Sensor Socket Set Rustproof Surface Standard Sizes with Square Hole for Automobile Repair, BOLORAMO Thread Chaser Tool
BOLORAMO - Dies and sockets including thread dies, long and short oxygen sensor sockets, straight socket, with simple operation. Main purpose can be used with ratchet wrench and post to remove and install vehicle oxygen sensor or hex switch. Standard sizes these dies and sockets have standard threads and sizes, which are easy to operate and not easy to slip or loosen.
Manganese steel forged with 65 manganese steel, surface rustproof treatment, high hardness and corrosion resistance. Good compatibility suitable for and other most car models, good practicality and compatibility.
6. Draper
22mm, 3/8" Square Drive, Draper 55540 Oxygen Sensor Socket
Draper - Specialist Automotive Sockets. 3/8" square Drive. Manufactured from hardened chrome vanadium steel. Size: 22mm.
| Brand | Draper |
| Manufacturer | Draper |
| Height | 3.7 cm (1.46 Inches) |
| Length | 17.3 cm (6.81 Inches) |
| Weight | 0.24 kg (0.53 Pounds) |
| Width | 7.2 cm (2.83 Inches) |
| Part Number | 55540 |
| Model | 55540 |
7. BTSHUB
BTSHUB Automotive Oxygen Sensor Socket Set 10PC Socket Set Oxygen Sensor Removal Tool 1/2inches and 3/8 inches Square Drive
BTSHUB - Widely use: accepts either 3/8" or 1/2" square drive Ratchet Depending on the Size of the Socket. Suitable for titania and Zirconia oxygen sensors found on most modern vehicles. Strong and sturdy: constructed of heat-treated chrome vanadium steel and Chrome Molybdenum Steel with a Black Oxide Finish, durability, this oxygen sensor remover set is built for strength, and longevity; rust resistance and corrosion resistance.
Windows and slots enable sockets to be fitted over wiring harness. Easy to use: remove oxygen sensors, injectors, Oil Pressure Sending Units and Vacuum Switches. Package includes: 1-3/16" 29mm x 1/2" drive, 7/8" 22mm x 1/2" drive, 7/8" 22mm x 3/8" drive, 1" and 1-1/16" x 3/8" drive, 7/8" 22mm x 3/8" drive, 1-5/8" 27mm x 1/2" drive, 7/8" 22mm x 1/2" drive, 7/8" 22mm x 3/8"drive, 1-1/8" 28mm x 1/2" drive, 7/8" 22mm x 1/2" drive.
Easy to storage: all the tools are well organized in a storage case for easy transportation, simple storage, and quick identification. Also includes a carrying Case for Storage.
| Brand | BTSHUB |
| Manufacturer | RUICHEN |
| Height | 8 cm (3.15 Inches) |
| Length | 20 cm (7.87 Inches) |
| Width | 15 cm (5.91 Inches) |
| Part Number | BT0053 |
8. Tomantery
Oxygen Sensor Socket Set, Easy Operation Thread Chaser Tool Rustproof Surface Standard Sizes Manganese Steel with Square Hole for Automobile Repair
Tomantery - Main purpose can be used with ratchet wrench and post to remove and install vehicle oxygen sensor or hex switch. Standard sizes these dies and sockets have standard threads and sizes, which are easy to operate and not easy to slip or loosen.
Good compatibility suitable for and other most car models, good practicality and compatibility. Dies and sockets including thread dies, straight socket, long and short oxygen sensor sockets, with simple operation. Manganese steel forged with 65 manganese steel, surface rustproof treatment, high hardness and corrosion resistance.
9. SALUTUYA
SALUTUYA Thread Chaser Tool, Corrosion Resistant Oxygen Sensor Socket Set Easy Operation High Efficiency Rustproof Surface for Automobile Repair
SALUTUYA - Manganese steel forged with 65 manganese steel, surface rustproof treatment, high hardness and corrosion resistance. Standard sizes these dies and sockets have standard threads and sizes, which are easy to operate and not easy to slip or loosen.
Main purpose can be used with ratchet wrench and post to remove and install vehicle oxygen sensor or hex switch. Dies and sockets including thread dies, long and short oxygen sensor sockets, straight socket, with simple operation. Good compatibility suitable for and other most car models, good practicality and compatibility.
Tomantery - Good compatibility suitable for and other most car models, good practicality and compatibility. Standard sizes these dies and sockets have standard threads and sizes, which are easy to operate and not easy to slip or loosen. Manganese steel forged with 65 manganese steel, surface rustproof treatment, high hardness and corrosion resistance. Main purpose can be used with ratchet wrench and post to remove and install vehicle oxygen sensor or hex switch. Dies and sockets including thread dies, straight socket, long and short oxygen sensor sockets, with simple operation.
Jeanoko - Good compatibility suitable for and other most car models, good practicality and compatibility. Manganese steel forged with 65 manganese steel, surface rustproof treatment, high hardness and corrosion resistance. Dies and sockets including thread dies, straight socket, long and short oxygen sensor sockets, with simple operation. Standard sizes these dies and sockets have standard threads and sizes, which are easy to operate and not easy to slip or loosen. Main purpose can be used with ratchet wrench and post to remove and install vehicle oxygen sensor or hex switch.
BTSHUB - Widely use: accepts either 3/8" or 1/2" square drive Ratchet Depending on the Size of the Socket. Suitable for titania and Zirconia oxygen sensors found on most modern vehicles. Strong and sturdy: constructed of heat-treated chrome vanadium steel and Chrome Molybdenum Steel with a Black Oxide Finish, durability, this oxygen sensor remover set is built for strength, and longevity; rust resistance and corrosion resistance.
