As an Amazon Associate I earn from qualifying purchases.1. TML
Tap Handle Head Lever Top puller Remover Stuck handle Kitchen basin bath faucet
TML - This will only work with tap handles that have a screw in the end and can get leverage under the handle. Tap handle puller enables you to remove a stuck on stubborn tap head. Tested to be incredibly strong and remove the most stubborn handles.
2. ABD Tools
ABD Tools AB-THP-001 Tap Handle Puller
ABD Tools - Allows you to pull off or extract even the most difficult or stuck tap handles. Can be used on any type of tap. New tap handle puller. For removing stuck water tap handles.
| Brand | ABD Tools |
| Manufacturer | Advanced Building Design Ltd |
| Height | 8 cm (3.15 Inches) |
| Length | 15.01 cm (5.91 Inches) |
| Weight | 0.2 kg (0.44 Pounds) |
| Width | 3.99 cm (1.57 Inches) |
| Part Number | AB-THP-001 |
| Model | AB-THP-001 |
3. ABD Tools
ABD Tools AB-THP-002 Tap Handle Pusher/Remover, Grey
ABD Tools - Tap handle Pusher / Remover. Easy to use and re-useable. Removes tap handles without damaging them.
| Brand | ABD Tools |
| Manufacturer | ABD Tools |
| Height | 9 cm (3.54 Inches) |
| Length | 5 cm (1.97 Inches) |
| Weight | 0.17 kg (0.38 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | AB-THP-002 |
| Model | AB-THP-002 |
| Warranty | No warranty. |
4. KATSU Tools
2 Arms Special Thin Claws Mini Gear Bearings Puller Extractor 4"
KATSU Tools - Ultra thin claws to reach tight gears 1. 8~2mm. Please check chart for dimensions. Made from high quality carbon steel, forged and tempered. Suitable for power tools and similar applications. Available in 4 different sizes.
5. Neilsen
Black, Neilsen CT1785 Battery Terminal and Wiper Arm Puller
Neilsen - Item package dimension: 13. 4 cm l x 19. 0 cm w x 3. 2 cm H. Fits most terminal posts. Also suitable for windscreen wiper arms and some alternator bearings. Neilsen battery terminal and wiper arm puller.
| Brand | Neilsen |
| Manufacturer | neilsen |
| Height | 2 cm (0.79 Inches) |
| Length | 2 cm (0.79 Inches) |
| Weight | 0.13 kg (0.29 Pounds) |
| Width | 2 cm (0.79 Inches) |
| Part Number | CT1785 |
| Model | CT1785 |
| Warranty | 1 year |
6. Easy Tapsplitter
Easy Tapsplitter TK-BAC-001 Tool kit for Releasing Head Nuts on Dripping or Stuck Pillar and bib taps
Easy Tapsplitter - No risk of causing basins, baths or sinks to crack or causing pipe connections to leak. Guaranteed to apply full, safe, indirect force to undo a tap head however tight or seized. 4 inserts 17mm, 19mm, 17.
5mm, & 22mm to fit most pillar and bib tap head nut sizes. A tap repair kit in a handy carry case designed purely for tap repair - which it does brilliantly. Safely release the head nut on pillar and bib taps in basins, baths or sinks with very little effort.
7. Unibond
Easy-to-Use Sealant Finishing Tool, UniBond Sealant Remover and Smoother Tool, 2-in-1 Plastic Sealant Tool for Smoothing and Removing Silicone Sealant, Black
Unibond - 100 percent smooth – the sealant smoother part of this tool has 2 smoothing profiles to produce ideal smooth sealant joints - for DIY jobs you can really be proud of.
Long-lasting – at unibond we take pride in producing the most durable, hard-wearing products - this handy sealant remover tool is tough and built to last. Easy-to-use – it doesn't get much simpler than this silicone sealant tool, get's the job of removing or smoothing sealant done easily and quickly with no fuss.
No damage – this unibond sealant remover is designed to allow you to remove existing sealant easily without damaging tiles or other surfaces - no unsightly scratches. Package contents – 1x unibond sealant remover and Smoother Tool, durable, easy-to-use 2-in1 sealant finishing tool for smoothing and removing sealant, black.
| Brand | Unibond |
| Manufacturer | Unibond |
| Height | 2.9 cm (1.14 Inches) |
| Length | 27.41 cm (10.79 Inches) |
| Weight | 0.04 kg (0.09 Pounds) |
| Width | 11.81 cm (4.65 Inches) |
| Part Number | UNI1550217 |
| Model | UNI1550217 |
8. Wärmer System
Hot Cold Top Indicator, Wärmer System Bathroom Kitchen Sink Tap Top Head Covers, Standard Tap Tops Replacement for Leaking Aging Taps, 1/2'' Tap Revivers
Wärmer System - Bathroom/kitchen decor live up your bathroom/kitchen with this beautiful, shiny tap tops replacement as a finishing touch to your tap.
This beautiful acrylic clear body has engraved little lines which give your tap that WOW effect. Great replacement for your leaky, stiff, aging plastic tap. Easy to clean due to its smooth surface it's very easy to keep it clean.
No sharp edges. Beautiful design might be something to take under consideration. Easy to fit using just an adjustable spanner. No more leaking taps or whistling pipes in a middle of night. It takes only few minutes to replace your old ones.
9. Walfront
Adjustable 130mm Tap Wrench Handle Holder Engineers Tap and Die Set Thread Cutting Tool Suitable for M1-M6
Walfront - Tapping wrench effencient tool-- tap wrench can improve efficiency, it is a necessary tool for tapping. Convenient&practical-- adjustable jaws easy and firmly clamp the tools. Easy adjustment-- easily adjusted by twisting the handle, very convenient and practical.
High torque steel-- made of high quality steel with high torque and high hardness, clamp firmly, durable and long service life. M1 to m6 suitable-- wrench is adjustable and widely applied tapping a variety of thread from M1 to M6, could meet different threading repair needs. Mainly used for hand tapping operation.
| Brand | Walfront |
| Manufacturer | Walfront |
| Height | 10 cm (3.94 Inches) |
| Length | 15 cm (5.91 Inches) |
| Weight | 1 |
| Width | 10 cm (3.94 Inches) |
| Part Number | Walfront |
TML - This will only work with tap handles that have a screw in the end and can get leverage under the handle. Tap handle puller enables you to remove a stuck on stubborn tap head. Tested to be incredibly strong and remove the most stubborn handles.
ABD Tools - Allows you to pull off or extract even the most difficult or stuck tap handles. Can be used on any type of tap. New tap handle puller. For removing stuck water tap handles.
KATSU Tools - Ultra thin claws to reach tight gears 1. 8~2mm. Please check chart for dimensions. Made from high quality carbon steel, forged and tempered. Suitable for power tools and similar applications. Available in 4 different sizes.
Easy Tapsplitter - No risk of causing basins, baths or sinks to crack or causing pipe connections to leak. Guaranteed to apply full, safe, indirect force to undo a tap head however tight or seized. 4 inserts 17mm, 19mm, 17. 5mm, & 22mm to fit most pillar and bib tap head nut sizes. A tap repair kit in a handy carry case designed purely for tap repair - which it does brilliantly. Safely release the head nut on pillar and bib taps in basins, baths or sinks with very little effort.
Unibond - 100 percent smooth – the sealant smoother part of this tool has 2 smoothing profiles to produce ideal smooth sealant joints - for DIY jobs you can really be proud of.
Wärmer System - Bathroom/kitchen decor live up your bathroom/kitchen with this beautiful, shiny tap tops replacement as a finishing touch to your tap.
Walfront - Tapping wrench effencient tool-- tap wrench can improve efficiency, it is a necessary tool for tapping. Convenient&practical-- adjustable jaws easy and firmly clamp the tools. Easy adjustment-- easily adjusted by twisting the handle, very convenient and practical. High torque steel-- made of high quality steel with high torque and high hardness, clamp firmly, durable and long service life. M1 to m6 suitable-- wrench is adjustable and widely applied tapping a variety of thread from M1 to M6, could meet different threading repair needs. Mainly used for hand tapping operation.
